Corrupt Task Scheduler Entries

Find the relevant task listed in the registry:

Take note of the Task ID and Name:

Find and delete the task in the following registry location:

HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionScheduleTaskCacheTasks

Find and delete the corresponding tasks/files located in C:WindowsSystem32Tasks

PerfMon problems – Unable to Add Counters

Opening Performance in Server manager displays on a Windows 2008 R2 server with XenApp6.5

“Unable to add these counters:

MemoryAvailable MBytes
Memory% Committed Bytes In Use
MemoryCache Faults/sec
MemoryCache Faults/sec
PhysicalDisk(*)%Idle Time
PhysicalDisk(*)Avg. Disk Queue Length
Network Interface(*)Bytes Total/sec”

Continue reading “PerfMon problems – Unable to Add Counters”

Installing debian on the SS4000-E

This Article is still in progress

Installing Debian

To boot the installer, you will need a serial nullmodem cable; a computer with a serial port; and a ribbon cable with a male DB9 connector at one end, and a 10-pin .1″ IDC header at the other and an active http server.

NB: Cable Connection Layout

Continue reading “Installing debian on the SS4000-E”

Change NetScaler 10x IP via CLI

1. Log into your NS with root account (nsroot)

2. Type the following

set ns config [-IPAddress <ip_addr> -netmask <netmask>] (Example: set ns config -ipaddress 10.11.12.13 -netmask 255.255.255.0)
show ns config
save ns config
reboot